Suppliers of Long Range Wireless
Network Equipment & Accessories


Product Search

Advanced Search

Wireless Standards
Output Power
Ethernet Speed
Ethernet Ports
Integrated PoE
Reset All

Cat6 Power Injector Lightening Protector

SKU: LP-15
Cat6 Indoor Passive Power Injector Lightning Protector (BT-CAT6-P1-HP)
Integrated PoE
PoE (802.3af/at)
Ethernet Speed
In stock
Package Contents
The BT-CAT6-P1-HP Single-Port Gigabit CAT6 Midspan/Injector is a commercial grade Power-over-Ethernet device that provides DC or AC power for one 10/100/1000 Base-T Power-over-Ethernet, PoE equipped Network Appliance device. The unit uses Gigabit transformers on all four data pairs in contrast to cheaper designs that only use transformers for two pairs. It is compatible with devices that support the IEEE 802.3af and 802.3at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The unit can also be user configured using internal jumpers to supply power up all four data pairs simultaneously (Pins 1/2, 3/6, 4/5 and 7/8). The majority of IEEE 802.3af and 802.3at Network Appliances can pull power off all four data pairs simultaneously. This allows higher power to be fed up the cable and cuts resistive power losses in the cable by half. The unit supports both positive and negative DC as well as AC power up to 60 volts. Power-over-Ethernet eliminates the need for an AC outlet at each Network Appliance location. An integral PTC fuse cuts power in case of a short. The PTC fuse auto resets after the short is removed. Shielded Ethernet cable and connectors is your first line of defence for lightning and surge protection with the Ubiquiti and MikroTik outdoor Access Points. The BT-CAT6-P1-HP features shielded RJ45 jacks. This along with the BT-CAT6-P1-HP's metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the injector housing providing superior grounding. The cast aluminium housing includes integral mounting feet for ease of installation.
  • IEEE 802.3af and 802.3at compatibility
  • Surge Protection on all lines
  • User configurable power feed and resettable PTC fuse
  • GR-1089 Intra-Building rated
  • Up to 60 volts DC or AC power
  • Great for protecting your Ubiquiti, MikroTik and EnGenius wireless equipment
Manufacturer's Product CodeBT-CAT6-P1-HP
Connector Type 1RJ45 Female
Connector Type 2RJ45 Female
PoE Clamping Voltage90V
PoE Mode Support802.3af/at
Voltage Rating60V (AC/DC)